Maximum Output Power 2 x 120W or 1 x 300W (4Ω)
# Continuous power output (RMS) 14.4V (20Hz-20kHz/4Ω): 2 x 60W / 1 x 150 W (bridged)
# 14.4V (20Hz-20kHz/2Ω): 2 x 75W
Maximum Output Power 2 x 250W or 1 x 760W (4Ω)
# Continuous power output (RMS) 14.4V (20Hz-20kHz/4Ω): 2 x 125 W/1 x 380W (bridged)
# 14.4V (20Hz-20kHz/2Ω): 2 x 190W
Designed to match our first-class SPL subwoofers, our SPL Champion Edition amps continuously break world records, pushing beyond the 180dB barrier.
They manage to do this by incorporating the very best in audio technology, to give you rock-solid, reliable power.
The D1200 delivers 1 x 2400W at 1Ω, 1 x 2000W at 2Ω and 1 x 1000W at 4Ω.
The D1200 includes an Independent Rail Regulating Power (IRRP) supply. This power supply structure regulates the positive and negative rail voltages separately, whereas most amplifiers regulate the positive rail alone.
The negative rail could destabilise during a crucial SPL moment, resulting in overall loss of performance; the IRRP boosts strength, so you can rely on the power when you need it most.
The D1200 also includes a protective circuitry (DAP: Dynamic Amplifier Protection) that adapts to the output signal level. As a result, the protection level matches the operating condition of the moment. Again, DAP gives you extra reliability, even at higher output.
Highly efficient Class-D technology is part of the amplifier construction, as well. That means less current for less heat, with no distortion, so that your sound always stays pure, crisp and clear.
Engineered with excellence, this PRS amp is designed to deliver the purest, most powerful, distortion-free sound possible.
It's loaded with high-grade components and high-performance technologies - like separate left and right channels, independent left and right power supplies and gain control.
This means that this amplifier operates with maximum separation and control, and minimum distortion. In short, the highest possible sound quality. This is the ultimate amp to drive a high-end system with utmost intensity and clarit
Pioneer PRS-D2000SPL Competition Class SPL Class-D Amplifier
Item in stock
only £
Pioneer PRS-D2000SPL
Competition Class SPL Class-D Amplifier (4000W)
Trusted for maximum, stable and reliable power
Designed to match our first-class SPL subwoofers, our SPL Champion Edition amps continuously break world records, pushing beyond the 180dB barrier.
They manage to do this by incorporating the very best in audio technology, to give you rock-solid, reliable power.
The D2000 delivers 1 x 4000W at 1Ω, 1 x 3000W at 2Ω and 1 x 1500W at 4Ω.
IRRP Power SupplyThe D2000 includes an Independent Rail Regulating Power (IRRP) supply. This power supply structure regulates the positive and negative rail voltages separately, whereas most amplifiers regulate the positive rail alone.
The negative rail could destabilise during a crucial SPL moment, resulting in overall loss of performance; the IRRP boosts strength, so you can rely on the power when you need it most.
DAP CircuitryThe D2000 also includes a protective circuitry (DAP: Dynamic Amplifier Protection) that adapts to the output signal level. As a result, the protection level matches the operating condition of the moment. Again, DAP gives you extra reliability, even at higher output.
Highly efficient Class-D technology is part of the amplifier construction, as well. That means less current for less heat, with no distortion, so that your sound always stays pure, crisp and clear.
